ZENER DIODESRD2.0FM to RD120FMZENER DIODES1 W 2 PIN POWER MINI MOLDDESCRIPTION
Type RD2.0FM to RD120FM series are 2 pin powermini mold package zener diodes possessing anallowable power dissipation of 1 W.
PACKAGE DIMENSIONS
(Unit: mm)
4.7 ±0.34.3 ±0.11.1 ±0.10.8 ±0.1QUALITY GRADE
0 to 0.15 Standard.
Please refer to “Quality Grades On NEC SemiconductorDevices” (Document number C11531E) published byNEC Corporation to know the specification of quality
1.3 ±0.21.55 ±0.11.4 ±0.1FEATURES
•Sharp breakdown characteristics•VZ: Applied E24 standard
CathodeIndicationAPPLICATIONS
Circuits for, constant voltage, constant current, waveform clipper, surge absorber, etc.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Power DissipationForward CurrentJunction TemperatureStorage Temperature
PIFTjTstg
1200150−55 to +150
WmA°C°C
The information in this document is subject to change without notice. Before using this document, pleaseconfirm that this is the latest version.Not all devices/types available in every country. Please check with local NEC representative foravailability and additional information.Document No.D16083EJ1V0DS00 (1st edition)Date PublishedMarch 2002 NS CP(K)Printed in Japan
©
2.5 ±0.1grade on the devices and its recommended applications.
2002
RD2.0FM to RD120FMELECTRICAL CHARACTERISTICS (TA = 25 ±2°C)
Type Number
Class
Zener VoltageVZ (V)
MIN.
RD2.0FMRD2.2FMRD2.4FMRD2.7FMRD3.0FMRD3.3FMRD3.6FMRD3.9FMRD4.3FMRD4.7FMRD5.1FMRD5.6FMRD6.2FMRD6.8FMRD7.5FMRD8.2FMRD9.1FMRD10FMRD11FMRD12FMRD13FMRD15FMRD16FMRD18FMRD20FMRD22FMRD24FMRD27FMRD30FMRD33FMRD36FMRD39FMRD43FMRD47FMRD51FMRD56FMRD62FMRD68FM
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
1.92.12.32.52.83.13.43.74.04.44.85.35.86.47.07.78.59.410.411.412.413.815.316.818.820.822.825.128.031.034.037.040.044.048.053.058.064.0
Note1
(1/2)
Dynamic Impedance
ZZ (Ω)
IZ (mA)55555555555555555555555552222222222222
MAX.1401401401401401401401401401001007040252525252020253030404555557080808090130150170220220220230
Note2
Reverse Current
IR (µA)
MAX.200200200150100806040202020202020202020101010101010101010101010101010555555
VR (V)0.50.71.01.01.01.01.01.01.01.01.01.53.03.54.05.06.07.08.09.0101112131517192123252730333639434752
MAX.2.22.42.62.93.23.53.84.14.54.95.46.06.67.27.98.79.610.611.612.614.115.617.119.121.223.325.628.932.035.038.041.045.049.054.060.066.072.0
IZ (mA)55555555555555555555555552222222222222
Note1. VZ is tested with pulsed (40 ms).
2. ZZ is measured at IZ by given a very small A.C. signal.2
Data Sheet D16083EJ1V0DS
RD2.0FM to RD120FMELECTRICAL CHARACTERISTICS (TA = 25 ±2°C)
Type Number
Class
Zener VoltageVZ (V) Note1
MIN.
RD75FMRD82FMRD91FMRD100FMRD110FMRD120FM
BBBBBB
70.077.085.094.0104.0114.0
MAX.79.087.096.0106.0116.0126.0
IZ (mA)222222
Dynamic Impedance
ZZ (Ω) Note2
MAX.250270340430530620
IZ (mA)222222
MAX.555555
IR (µA)
VR (V)576369768491
(2/2)
Reverse Current
Note1. VZ is tested with pulsed (40 ms).
2. ZZ is measured at IZ by given a very small A.C. signal.
Data Sheet D16083EJ1V0DS
3
RD2.0FM to RD120FMTYPICAL CHARACTERISTICS (TA = 25°C)
Fig.1 P - TA RATING
1.0P - Power Dissipation - W30 x 8 x 0.7P.C.B (Ceramic)20 x 30 x 1.6P.C.B (Glass Epoxy)0.5
Free Air0100TA - Ambient Temperature - ˚C
200Fig.2 IZ - VZ CHARACTERISTICS (a to f)
RD6.2FMRD5.6FMRD5.1FM100 mRD4.7FMRD4.3FMRD3.9FMRD3.6FM10 mRD3.3FMRD3.0FMRD2.7FM1 mRD2.4FMRD2.2FM100 µRD2.0FM10 µ1 µ100 n10 n1 nRD6.8FMRD8.2FMRD7.5FM100 m10 m1 mRD11FMRD12FMRD10FMRD13FMRD9.1FMIZ - Zener Current - AIZ - Zener Current - A100 µ10 µ1 µ100 n10 n1 n01234567890789101112131415VZ - Zener Voltage - V(a)VZ - Zener Voltage - V(b)4
Data Sheet D16083EJ1V0DS
RD2.0FM to RD120FM100 mRD24FM10 mRD15FMRD16FM100 mRD22FMRD27FMRD18FMRD20FM1 m10 m100 µ1 mAA -- ttnerr10 µner100 rµuuCC rre1 µennee10 µZZ -- ZZII100 n1 µ10 n100 n1 n10 n01112131415161718191 n0182022242628VZ - Zener Voltage - VVZ - Zener Voltage - V(c)(d)RD36FMRD120FM100 mRD33FMRD39FM100 mRD43FMRD100FMRD110FMRD30FMRD47FM10 m10 mRD51FMRD56FM1 m1 mRD62FMAARD68FM -- ttRD75FMnneer100 r100 rµrµRD82FMuuCCRD91FM rreene10 µne10 µZZ -- ZZII1 µ1 µ100 n100 n10 n10 n1 n0253035401 n030507090VZ - Zener Voltage - VVZ - Zener Voltage - V(e)(f)Data Sheet D16083EJ1V0DS
5
RD2.0FM to RD120FMFig.3 γ Z - VZ CHARACTERISTICS
0.140.1256480.080.060.040.020−0.02−0.04−0.06−0.08−0.1048121620242832VZ - Zener Voltage - V36IZ = 5 mA, 2 mA404448%/˚CmV/˚C32241680−8−16−24−3252Fig.4 ZZ - IZ CHARACTERISTICS
1000TA = 25˚CTYP.1000TA = 25˚CTYP.100100ZZ - Zener Impedance - Ω10ZZ - Zener Impedance - Ω10γZ - VZ Temperature Coefficient - mV/˚CRD47FMRD20FMγZ - VZ Temperature Coefficient - %/˚C0.10405RDRD.1FM5.6FMRD1511RD6.8FMRD6.2FMRD7.5FM0.1FMRD10FM1(a)10IZ - Zener Current - mA1000.11(b)10IZ - Zener Current - mA1006
Data Sheet D16083EJ1V0DS
RD2.0FM to RD120FMFig.5 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS
1000W312˚C/W/C˚ - ec100nadepmI lam10rehT tneisna1rT - htZ0.11 m10 m100 m110100t - Time - secFig.6 SURGE REVERSE POWER RATINGS
10000TARepetitive = 25˚CMSR WPtT - 1000rewoP esreve100R egruS - MS10RP11µ10µ100µ1 m10 m100 mt - Pulse Width - secData Sheet D16083EJ1V0DS
7
RD2.0FM to RD120FM•The information in this document is current as of March, 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information.•No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.•NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others.•Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information.•While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features.•NEC semiconductor products are classified into the following three quality grades:\"Standard\developed based on a customer-designated \"quality assurance program\" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. \"Standard\":Computers, office equipment, communications equipment, test and measurement equipment, audioand visual equipment, home electronic appliances, machine tools, personal electronic equipmentand industrial robots\"Special\":Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disastersystems, anti-crime systems, safety equipment and medical equipment (not specifically designedfor life support)\"Specific\":Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, lifesupport systems and medical equipment for life support, etc.The quality grade of NEC semiconductor products is \"Standard\" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application.(Note)(1)\"NEC\" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.(2)\"NEC semiconductor products\" means any semiconductor product developed or manufactured by or forNEC (as defined above).M8E 00. 4
因篇幅问题不能全部显示，请点此查看更多更全内容